苏州科镭沃环保科技有限公司
Suzhou Clover Environmental Protection Technology Co., LTD

产品详情
APM-7自动闭口闪点试验仪
APM-7自动闭口闪点试验仪
产品详情

宾斯基·马丁闭口杯

自动闪点试验仪    

品牌:日本松岗产业株式会社

Model APM-7 is the latest version of theautomated Pensky-Martens Closed Cup(PMCC) flash point tester from Japan. Whenthis seventh generation model was designed after 35 years of delivering theautomated flash point testers to the petroleum industry, ease of operation andmaintenance was sought.  

APM-7自动闭口闪点试验仪严格按照宾斯基o马丁闭口杯(PMCC)测试石油产品的开口闪点。仪器是采用进口部件组装的自动闪点测试仪器,操作简单,功能完善,易于维护。

SINGLE ACTION SETTING: The cup cover andthe stirrer are permanently mounted on a swing-arm assembly, which allows aneasy handling of the test cup cover. It makes free from handling the hot cupcover after completing a test.

仪器摆动式测试臂简单实用,一体式的样品杯盖加滑动点火头设计。样品杯更换,拆卸清洗都非常方便。

EASY OPERATION: Select a test mode andenter the expected flash point; while the instrument executes the test, you arefree to do other lab work. The instrument follows the exact proceduresprescribed in the test method, and the completion of the test cycle is signaledby beeps. The test result is brightly shown on the VFD module.

测试闪点只需预设闪点温度,和对应的测试模式,仪器就严格按照试验标准自动进行测试,无需人为干预。全微机控制,升温和测试过程精确可靠,全数字显示闪点温度和点火次数。试验结束,讯响提示,并自动风冷。一人可同时操作多台仪器,有效的提高了人员效率。

INTERCHANGEABLE IGNITION SOURCE: APM-7 isequipped with both gas and electric igniter as the ignition source. It onlytakes a few minutes to switch from gas to electric or vice versa.

APM-7提供了燃气点火和电子点火2种点火测试方式,更换非常简单,适用于多种不同场合的需求。

DRAFT PROTECTION SHIELD COVER: A tintedacrylic cover not only insures the flame integrity but reduces the glare fromthe electric igniter coil. 有色树脂防风罩,不仅确保了火焰的完整,而且降低了电点火线圈的眩光。

DATA HANDLING: The unit is equipped tostore up to 50 successive test results and export to an optional printer or toa LIMS through an RS232 port.

仪器可记录最后50 次的试验数据,内置电池,即使关机数据也不会丢失。还可以通过RS-232外接打印机输出,或同实验室信息管理系统(LIMS)通讯,便于集中控制管理。

Automated Pensky-Martens Closed Cup FlashPoint Tester, model APM-7

SPECIFICATIONS:

CONFORMING STANDARDS: (适用标准)

ISO 2719, ASTM D93, IP 34, GB/T 261,etc.

MEASURING RANGE: (测试范围)

Ambient to 370 ℃  ( 室温 - 370℃)

TEST MODES: (测试模式)

ASTM D93 (ISO 2719, IP 34) A+B, (闪点+燃点)ASTM D93 A法+B法

Special (Fast Search), (闪点快速搜寻,检测预期闪点)

Simulated TAG,  (泰克杯法模拟模式,低温闭口闪点)

User’s Custom (用户自定义)

DISPLAY: (显示)

Fluorescent display tube (VFD Module) VFD荧光显示屏

TEMPERATUR SENSOR: 温度控制

PT-100 in stainless steel sheath (不锈钢护套PT-100传感器)

FLASH DETECTOR: 闪点检测

CRC Thermocouple (CRC 热电偶)

HEATER: 加热功率

Band type heater: 400W@100V or 400W@220V 杯型加热盘

IGNITION SOURCES: (点火)测试方式

Gas ignition with automatic lighting orelectric ignition, interchangeable

燃气点火测试。(带自动点火,需要外接燃气。)或电子点火测试。两者可相互更换。

COOLING DEVICE:

Forced air cooling by sirocco fan (试验结束)强制风冷

BAROMETRIC CORRECTION: 气压补正

By entering the barometric pressure readingthrough the control panel, or by optional barometric pressure sensor可在仪器的设置面板中设定大气压力数值,仪器自动计算并补正最终的试验结果。或加装气压检测传感器(选购件),仪器自动采集大气压力数值并计算补正试验结果。

DATA OUTPUT: 数据输出

RS-232C   1channel (for PC or Optional Printer) RS-232C 接口,1,可连接电脑或打印机

SAFETY MECHANISM: (安全保护)

Automatically shuts off and the problem isreported by buzzer and display, in case:

下列情况下,仪器自动关机,报警提示,并显示相关出错信息:

(a) EFP+20 ℃or 370 ℃ is reached,

  超过预期闪点值20 ℃未检测出闪点,或超过了检测范围(370 ℃)时

(b) temperature sensor is found defective, 温度检测传感器出错时

(c) flash detector is found defective, 闪点检测传感器出错时

(d) thermofuse is blown, 温度保险丝熔断时

(e) electric Igniter is blown, 电子点火头失效时

(f) stirring motor is stopped, 搅拌电机失效时

(g) built-in battery is found drained out, 内置电池失效时

(h) test cover is not set in place, 样品杯盖或滑动点火头动作没有归位时

(i) flash detector detects continuousburning, or 发生连续燃烧时,

(j) control computer runs away (no display)微处理器失效(无显示)

DIMENSIONS & WEIGHT: (体积/重量)

控制部,Controlunit: 230W x 455D x 110H (mm), 6.0kg

测试部,Test unit:230W x 480D x 275H, (mm) 18.0kg

INSTALLATION SITE: 环境要求

Ambient temperature: 0 to 40 ℃  环境温度 0 - 40 ℃

RH: Less than 90%(no condensation) 环境湿度 < 90% (无凝结)

UTILITY: POWER SUPPLY: 电源要求,订购前说明

AC100/120V or 220/240V  50/60Hz (set at the factory)  0.7kW(max.)

GAS SUPPLY (When Gas Ignition is used): (燃气要求,电子点火无需燃气支持)

LP gas or natural gas (Max.pressure<9.8kPa) 液化石油气或者天然气,压力要求小于<9.8kPa

ORDERING INFORMATION:

STANDARD ACCESSORIES: (标准附件)

1     Test  Cup Assembly 样品杯,宾斯基o马丁闭口杯

1pc

2     Power  Connecting Cable, 0.6m 电源连接线

1pc

3     Signal  Connecting Cable, 0.6m 信号连接线

1pc

4     AC Power Cord, 3.0m  (2.5m  (>AC200V) 电源线

1pc

5     Spare  Thermofuse温度保险丝备件

3pcs

6     Spare  Electric Igniter 电子点火头备件

1pc

7     Insulation  tube for Thermofuse, 0.1m  温度保险丝护套管

1pc

8     Gas  Hose 9x16x1500mm燃气管,耐压管

1pc

9     Gas  Hose Band管夹

2pcs

10    Wind  Screen 防风罩

1pc

11    Instruction  Manual使用说明书

1pc