苏州科镭沃环保科技有限公司
Suzhou Clover Environmental Protection Technology Co., LTD

产品详情
ACO-7自动开口闪点试验仪
ACO-7自动开口闪点试验仪
产品详情

克利夫兰开口杯

自动开口闪点试验仪

品牌:日本松岗产业株式会社

Model ACO-7 is the latest version of theautomated Cleveland Open Cup(COC) flash point tester from japan. When thisseventh generation model was designed after 35 years of delivering theautomated flash point testers to the petroleum industry, ease of operation andmaintenance was sought.

ACO-7自动开口闪点试验仪严格按照克利夫兰开口杯法(COC)测试石油产品的开口闪点。仪器是采用进口部件组装生产的自动闪点测试仪器,操作简单,功能完善,易于维护。

SINGLE ACTION SETTING: The flash detectorrings and the temperature sensor are permanently mounted on a swing-armassembly, which allows an easy setting of the specimen .仪器摆动式测试臂简单实用,使用双环形电极检测闪点,温度控制灵敏度高。样品杯更换,拆卸清洗都非常方便。

EASY OPERATION: Select a test mode andenter the expected flash point; while the instrument executes the test, you arefree to do other lab work. The tester follows the exact procedures prescribedin the test method, and the completion of the test cycle is signaled by beeps.The test result is brightly shown on the VFD module. 测试闪点只需预设闪点温度,和对应的测试模式,仪器就严格按照试验标准自动进行测试,无需人为干预。全微机控制,升温和测试过程精确可靠,全数字显示闪点温度和点火次数。试验结束,讯响提示,并自动风冷。一人可同时操作多台仪器,有效的提高了人员效率。

AUTO FIRE POINT DETECTION: In addition tothe flash point, fire point can be determined automatically. The fire point isdetected when the double Ionization rings detects 5 sec of continuous burning.ACO-7还可以测试样品的燃点。在燃点检测模式下,仪器在检测出闪点后再次连续点火试验,直至样品连续燃烧5秒钟的温度点,就是样品的燃点。

AUTO FIRE CONTAINMENT: ACO-7 is equippedwith a fire containment lid which activates automatically to help putting outfire when ACO-7 detects a fire point or specimen is burning up heavily. ACO-7配备有自动灭火盖,简单实用,可在测试样品的燃点后自动灭火。作为仪器安全措施的一部分,自动灭火系统也有效的避免了测试中引起火灾的意外情况。

DATA HANDLING: The unit is equipped tostore up to 50 successive test results and export to an optional printer or toa LIMS through an RS232 port. 仪器可记录最后50 次的试验数据,内置电池,即使关机数据也不会丢失。还可以通过RS-232外接打印机输出,或同实验室信息管理系统(LIMS)通讯,便于集中控制管理。

AutomatedCleveland Open Cup Flash Point Tester, model ACO-7

SPECIFICATIONS:

CONFORMING STANDARDS: (适用标准)

ISO 2592, ASTM D92, IP 36, GB/T 3536 etc.

MEASURING RANGE: (测试范围)

Ambient to 400 ℃( 室温 - 400℃)

TEST MODE: (测试模式)

ASTM D92 Flash + Fire(闪点+燃点),

Special (Fast Search)(闪点快速搜寻,预期闪点测试),

User’s Custom (用户自定义)

DISPLAY: (显示)

Fluorescent display tube (VFD Module) VFD荧光显示屏

TEMPERATUR SENSOR: 温度控制

PT-100 in stainless steel sheath (不锈钢护套PT-100传感器)

FLASH DETECTOR: 闪点检测

Ionization Ring 环形电极(火焰离子检测)

HEATER: 加热功率

Nichrome Coil heater: 800W@100V or800W@220V镍铬合金加热盘,加热功率800W

IGNITION SOURCE: (点火)测试方式

Gas ignition with automatic lighting 燃气点火测试。(带自动点火,需要外接燃气。)

COOLING DEVICE:

Forced air cooling by sirocco fan (试验结束)强制风冷

BAROMETRIC CORRECTION: 气压补正

By entering the barometric pressure readingthrough the control panel, or by optional barometric pressure sensor 可在仪器的设置面板中设定大气压力数值,仪器自动计算并补正最终的试验结果。或加装气压检测传感器(选购件),仪器自动采集大气压力数值并计算补正试验结果。

DATA OUTPUT: 数据输出

RS-232C   1channel (for PC or Optional Printer) RS-232C 接口,1,可连接电脑或打印机

SAFETY MECHANISM: (安全保护)

Fire containment lid which activatesautomatically to help putting out fire when ACO-7 detects a fire pointAutomatically shuts off and the problem is reported by buzzer and display, incase:

下列情况下,仪器自动关机,报警提示,并显示相关出错信息。燃点测试模式或意外火警时,自动灭火盖能在第一时间灭火动作:

(a) EFP+30 ℃or at 400 ℃ is reached,

  超过预期闪点值30 ℃未检测出闪点,或超过了检测范围(400 ℃)时

(b) Temperature sensor is found defective, 温度检测传感器出错时

(c) Flash detector is found defective, 闪点检测传感器出错时

(d) Thermofuse is blown (Also firecontainment lid activates),

  温度保险丝熔断或执行灭火动作时

(e) Built-in battery is found drained out, 内置电池失效时

(f) Arm is not set in place, or 自动灭火盖没有回复在安全位置

(g) Control computer runs away (no display)微处理器失效(无显示)

DIMENSION & WEIGHT: (体积/重量)

控制部,Controlunit: 230W x 455D x 110H (mm), 6.0kg

测试部,Test unit:230W x 450D x 275H (mm), 14.0kg

INSTALLATION SITE: 环境要求

Ambient temperature: 0 to 40 ℃  环境温度 0 - 40 ℃

RH: Less than 90%(no condensation) 环境湿度 < 90% (无凝结)

UTILITY: POWER SUPPLY: 电源要求,订购前说明

AC100/120V or 220/240V  50/60Hz (set at the factory)  1.0kW(max.)

GAS SUPPLY: (燃气要求)

LP gas or natural gas (Max.pressure<9.8kPa) 液化石油气或者天然气,压力要求小于<9.8kPa

ORDERING INFORMATION:

STANDARD ACCESSORIES: (标准附件)

1     Test  Cup Assembly 样品杯,克利夫兰开口杯

1pc

2     Power  Connecting Cable, 0.6m 电源连接线

1pc

3     Signal  Connecting Cable, 0.6m 信号连接线

1pc

4     AC Power Cord, 3.0m  (2.5m  (>AC200V) 电源线

1pc

5     Thermal  Insulation (Heating Plate) 隔热片,保温板

1pc

6     Spare  Thermofuse 温度保险丝备件

3pcs

7     Insulation  tube for Thermofuse, 0.1m温度保险丝护套管

1pc

8     Gas  Hose 9x16x1500mm 燃气管,耐压管

1pc

9     Gas  Hose Band 管夹

2pcs

10    Instruction  Manual 使用说明书

1pc